+
  • z17.jpg
  • Pan Head Self Tapping Screws DIN 7981 (1).jpg
  • Pan Head Self Tapping Screws DIN 7981 (2).jpg
  • Pan Head Self Tapping Screws DIN 7981 (4).jpg
  • Pan Head Self Tapping Screws DIN 7981 (2).png
  • Pan Head Self Tapping Screws DIN 7981 (3).jpg

Pan Head Tapping

Pan Head Self Tapping Screws DIN 7981

Categoria:


Características do produto

Thread size:#6, #7, #8, #10, #12, #14 (M3.5, M3.9, M4.2, M4.8,M5.5, M6.3) Length:1/4" to 6" (6mm to 152mm) Recess type:Phillip;Torx;Square;Pozi;Combo Recess Head type:Pan Head;Slotted Pan Head Thread type:Coarse thread (single thread);Fine thread (twinfast);Hi-Low thread;Type AB Point:Sharp point;Type 17; Finish:Phosphate (grey or black); Zinc Plated (clear / white / yellow); Coating (Geomet, Dacrotized, Ruspert etc.);

Combo Recess Self-tapping screw DIN 7981 pan head and Phillip recess is made of high-quality steel. Available in boxes and blister to meet any customer need. In different coatings black zinc plated, lacquered and blue zinc plated. Blue zinc plated coating meets the standard RoHs, free chrome. Self-Tapping screws are meant to be installed directly into sheet metal. Tapping Screws require a pilot hole and tap their own threads during install. They cannot be used with machine thread tapped holes or machine thread nuts. Wide head style with chamfered / curved sides and a recessed phillips drive, one of the most common sheet metal tapping screw styles.

Detalhes do Produto



Anterior:

CONSULTA EM LINHA


Nome do Produto:

Enviar